||Up to 10m
||+/- 10mm up to max range*
|Laser Scanner Field of View
||5.6mm, F/5.6, 185 degrees field of view, full circle fisheye
|Shots for 360 Degree Panorama
|DSLR Camera Sensor
||Automatic offline using Planitar software
|Connectivity and System Control
||Wi-Fi 802.11g/n 2.4GHz Access Point
|Survey Web App
||Planitar web app in a browser over Wi-Fi
||14.4V 49Wh Li-Ion battery, user-replaceable
|System Battery Charger
||Input: 100-240VAC, 50-60Hz, 1.4A; Output: 24VDC, 2.7A
|DSLR Camera Power
||7.4V battery, user-replaceable
|System Battery Capacity
||10 hours of typical operation
|System Unit Weight
||2.4 kg (5.2 lbs)
|System Unit Dimensions
||W: 15.3cm (6.0″) x D: 15.7cm (6.2″) x H: 24.6cm (9.7″)
|Weight with carrying case
||5.5 kg (12 lbs)
|Carrying Case Dimensions
||W: 37cm (14.6″) x D: 24cm (9.4″) x H: 34cm (13.4″)
|Tripod Mounting Thread
||3/8-16 (1/4-20 with included adapter)
|Operating Temperature Range
||5-40 degrees C (41-104 degrees F)
|Storage Temperature Range
||0-45 degrees C (32-113 degrees F)
* Typical, based on at least 60cm wide wall segment.
This product has been tested and was found to comply with the following standards:
- FCC PART 15, SUBPART B, Class B – Unintentional Radiators.
- Industry Canada ICES-003, Issue 6, Class B – Information Technology Equipment.
- CISPR 11:2009 + A1:2010 / EN 55011:2009 +A1:2010, Class B – Industrial, Scientific and Medical Equipment.
- EN 61326-1:2013 – Electrical Equipment for Measurement, Control and Laboratory Use – EMC Requirements, Part 1: General Requirements.
This product includes a laser scanner which is a Class 1 laser product and complies with IEC 60825-1 2007-03 Ed. 2.0 and 21 CFR Subchapter J Parts 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The product modifications not expressly approved by Planitar could void the user’s authority to operate the equipment under FCC rules.
This product includes a Wi-Fi USB adapter that has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without RF restriction.
This product is Class B, Group 1 ISM equipment according to CISPR 11. Group 1 ISM product: A product in which there is intentionally generated and/or used conductively coupled radio-frequency energy which is necessary for the internal functioning of the equipment itself. Class B products are suitable for use in domestic establishments and in establishments directly connected to a low voltage power supply network which supplies buildings used for domestic purposes.
Contact Planitar at www.planitar.com or Planitar authorized distributor for product disposal information and product take-back program.
Planitar warrants that, when used in accordance with the Documentation, the System shall be free from defects in materials and workmanship for one year from the date of delivery of the System to the Customer. In the event of a breach of this warranty, Customer’s exclusive remedy shall be Planitar’s repair or replacement of the deficient Hardware or Software or the deficient portions thereof, at Planitar’s option. Customer shall, upon request of Planitar, ship Product to Planitar following all shipping instructions provided by Planitar, at the expense of Customer. Return shipping from Planitar to Customer will be at the expense of Planitar. False warranty claims are cause for billing Customer for actual cost of repair parts and labour and return shipping expenses. Planitar reserves the right to use re-engineered part(s) with performance parameters substantially equivalent to the similar new part(s) in the performance of its obligations to repair to replace System components. All replaced System components become the property of Planitar. In the event of repairs or replacement of any part(s), during the warranty period, the warranty of the System shall thereafter continue only for the unexpired period of the original warranty. USB flash drive is considered a consumable component, is provided with the System for a new user’s convenience only and is excluded from this warranty.
This warranty is extended to Customer only and shall not apply in the event of: i) damage, defects or malfunctions resulting from misuse, accident, neglect, tampering, (including any alterations, additions, improvements, modification or replacement of any components supplied with the Hardware), unusual physical or electrical stress or causes other than normal and intended use; ii) failure of Customer to provide and maintain a suitable environment for the System; iii) malfunctions resulting from use not approved or recommended in the Documentation or otherwise in writing by Planitar; iv) exposure of the System to dirt, sand, water including rust inside the Hardware and fire and/or shock; v) removal, tampering with or mutilation of the model No. or serial No. sticker of the Hardware; vi) damage to the System arising out of the use of any accessories other than those supplied by Planitar; or vii) any defect that is the result of physical breakage, electric connection or electrical faults external to the System.
Customer may return, at the expense of Customer, the first System ever purchased by Customer from Planitar within 30 days of the date of the original shipment provided that the System is in the original packaging and all shipping instructions provided by Planitar are followed. For clarity: (i) no returns are possible after the 30 day period; and (ii) this Return Policy does not apply to any subsequently purchased System or any System obtained through a trade-in program. If the System is returned within this timeframe and confirmed by Planitar to be in full working condition and not to be damaged, Planitar will provide a refund based upon the original payment method and paid amount. Customer agrees that the refund will exclude the following: (i) restocking fee equal to 10% of the original System price; (ii) original shipping costs to Customer, and (iii) cost of any repairs required to restore the System to full working condition, as deemed necessary by Planitar.
Camera purchase financing is available in the US and Canada.
In the US, Planitar has partnered with Klarna to provide financing. Look for Financing option during checkout.
In Canada, Planitar has partnered with Ario to provide financing. Visit iguide.arioplatform.com to sign up and contact us for further processing.